|
|
Bandit 90 Brush Bandit
Model 90 (9" Disc Style) Brush Bandit
This rugged, compact 9 inch diameter capacity chipper meets the needs of most tree services, contractor's and govermental agencies, while delivering years of dependable service.
The model 90 is built tough like our popular 12 inch model 200+ and with the same powerful dual feed system found on our model 200+. This unit features a wide 17 inch chipper opening and has the power to pull whole trees into the chipper. So, if you are looking for a high production, yet compact hand fed chipper than give our model 90 a look. |
|
Specs:
| Dimensions |
|
  Width |
6' |
| Height |
8' |
| Length |
14' 2" w/ infeed tray closed |
| Weight |
3,800 - 4,600 pounds (depending on options) |
| Tires and Axles |
|
| Capacity |
7,000 lbs |
| Tire Suspension |
Torflex |
| Tires |
(2) 245 / 75R 16" load range E, 10 ply |
| Noise Level |
80 decibels at 50', 360 degrees |
| Tongue Jack |
|
| Capacity |
5000 lbs. |
| Type |
Stationary foot pad |
| Safety Chains |
5/16" links X 36" min (2) with hooks |
| Steel Fuel Tank Capacity |
24.5 gallons |
| Steel Hydraulic Tank Capacity |
7 gallons |
| Towing Hitch |
2-1/2" pintle ring or 2-5/16" ball |
| Hydraulic Feed System |
|
| PSI |
2500 |
| Feed Wheel Diameter |
(2) 7-1/2" X 16-3/8" long feed wheels |
| Drive Motor |
14 cubic inches |
| Feed Rate |
90 feet per minute |
| Hinged Yoke Assembly |
slide box |
| Output |
|
| 2 - Knife |
6.2 GPM |
| 3 - Knife |
7.4 GPM |
| Chipper Cutting Wheel |
|
| Disc |
30" diameter X 1-1/2" thick |
| Knife Pockets |
(2) full |
| Chipper Shaft |
4" diameter at hub |
| Infeed Hopper Opening |
|
| Height |
29" |
| Width |
35" |
| Control Bar |
Forward/Neutral/Reverse |
| Chipper Capacity |
9" diameter |
| Frame |
2" X 4" rectangular tubing |
| Discharge System |
|
| Swivel |
360 degree manual rotation, w/ chip deflector |
| Tool/Battery Box |
Lockable Aluminum battery box |
| Lighting Electrical System |
12 volt system w/ rubber mounted LED taillights, w/ 6 prong replaceable coiled trailer power cord |
Options:
- Telescoping adjustable tongue
- Spare tire and wheel
- Articulating tongue for curbside feed
- Hydraulic winch
- Swivel castor wheel - 1000 lb. capacity
- Spark arrestor muffler
- Rear jack stand
- Automatic feed system speed governor
- Remote control for winch
- Lockable fuel and hydraulic tank
- Special paint colors
- Brass sight gauges (steel tanks only) electric or non-electric
- Knife Saver knife sharpener
- Hand crank swivel discharge
- Height adjustable discharge (hand crank)
- Hydraulic controlled chip deflector
- Hydraulic swivel discharge
- Tachometer/hour meter
- Heavy duty tail light package
- Hydraulic lift cylinder
- Combination English/Spanish decals
- Hydraulic tongue jack
- Aluminum fenders
- Vice with mount attached
- Engine top cover for air-cooled engines
- Wheel chocks (steel or aluminum)
- Mud flaps
- 45 inch wide infeed tray (in lieu of standard)
- 303CR rubber track undercarriage, w/ radio remote
- 3 knife disc (in lieu of standard 2 knife)
|
Colors:
| Urethane Bandit Yellow |
|
| Urethane Black |
|
| Urethane Green |
|
| Urethane Alert Orange |
|
| Urethane Caterpillar Yellow |
|
| Urethane White | |
Engines:
| Manufacturer |
Model |
HP |
Type |
| Cummins |
B3.3-A |
65 |
Diesel |
| Cummins |
BT3.3-A |
85 |
Diesel |
| John Deere |
4045DF-150-A |
80 |
Diesel |
| Caterpillar |
3054B-A |
86 |
Diesel |
| Deutz |
F4M2011F |
66 |
Diesel |
| Deutz |
BF4M2011F |
88 |
Diesel |
| Perkins |
1104C-44 |
86 |
Diesel |
| Wisconsin |
VG4D |
37 |
Gasoline |
| Kubota |
v2203-3 |
49 |
Diesel |
| Lombardini |
CHD2004T |
57 |
Diesel |
| Perkins |
104-22 w/o clutch |
51.3 |
Diesel |
| Perkins |
104-22 w/ clutch |
51.3 |
Diesel |
| John Deere |
5030 T |
84 |
Diesel |
| Deutz |
F3L2011 w/clutch |
46.2 |
Diesel |
| Caterpillar |
3024C w/o clutch |
51.3 |
Diesel |
| John Deere |
5030T |
75 |
Diesel |
| Caterpillar |
3024C w/ clutch |
51.3 |
Diesel |
| Kubota |
V3300 |
73 |
Diesel |
| Kubota |
V3300-DI-T |
90 |
Diesel |
| Deutz |
F3L2011 w/o clutch |
46.2 |
Diesel |
|
|
|
